From now on, you are my people. If you have anything to do, just look for me, Yang Heng. The person who spoke is just over 30 years old. He is not tall but very strong. He has a short squat and thick black eyebrows. It means that he is a person who doesn't like nonsense. His left eye is unnaturally always looking at the upper left. His eyes seem to be unable to turn, and there is a scar on his right arm, winding from his wrist to his elbow.
Ertong put on the blue and gray work clothes he had just sent out, and was with four other workers who entered the factory yesterday. Listening to the motivated squad leader's lecture, he kept staring at the red edge on the collar of the squad leader's work clothes, hoping that there would be two or three collars on his future.
I have nothing to say, the rules are the same everywhere, you are not three-year-olds, you know what to do and what not to do. The class monitor really has very few words: Come with me
Ertong followed the queue and quietly looked back at the cement basketball court. Su Qin was standing alone in front of a female cadre. She listened to the lecture like Ertong. She now wears a wide blue and gray work clothes, covering up her beautiful figure. This is not a place to pursue beauty, so she won't have any complaints.
Because this factory is not only remote, but also a metal processing factory, there are very few female workers who are willing to come. There are very few young female workers who have studied high school like Piqin, so she was immediately assigned to the quality inspection department. The products made by Ertongs will be judged by Suqins to determine whether they are qualified.
The female cadre was very nagging. Suqin probably had to listen for a while. Ertong had to withdraw his gaze, follow the squad leader into the workshop, and go to the fourth floor to go through security check. After the squad leader took them to a row of machine tools and shouted: This is our 0636A-6 class, our 0636 team is now making side buttons for a mobile phone from LG. Our class is the last process that comes out of us, and will be installed directly on the mobile phone. After saying this, the squad leader raised his voice: I have no lazy people or waste here, I will do it well for me!
The squad leader didn't even have a mask. Dell Tong thought that he was wearing a mask honestly. After saying that, the squad leader turned around and shouted: Bright!
A tall and thin young man who was five or six years older than a Bill boy poked his head out of the two machine tools room, and then ran over to the squad leader to signal him to stand in front of the new workers: This is the deputy squad leader Mingliang, mainly he is here, you can follow his command, I applied to the skin supervisor yesterday to add five machines today, and I prepared the supporting molds and tools before I went to work. You can turn on the machine directly. I also have to go to Lao Wu, Class 5, to coordinate the order of sending the rough to the new ones. You can arrange it. After that, I stuffed the new employee's roster into the deputy squad leader who did not wear masks.
Old Wu owed us eight thousand roughs yesterday. The deputy squad leader quickly shouted: Brother Heng, you urge me
The squad leader waved his hand to show his understanding, and then walked away without looking back.
These two grassroots cadres gave Ertong full of confidence because they were not old. If they could become deputy squad leader and squad leader at their age, Ertong felt that his dream could be a reality.
The deputy squad leader took the roster and took Ertong and the others to the empty half-row machine tool, arranged one for each of them and called four technicians: Each of you is responsible for one Lao Hu, you bring two
The technician named Lao Hu was only in his early thirties, but he was hunched over and had a hunched back. He had severe dark circles on his waxy face. Hearing this arrangement, he immediately muttered dissatisfiedly: I've seen sixteen machines, plus two more, everyone is exhausted.
Ertong looked at the two yellow edges on his neckline. This yellow edge marked Lao Hu as a senior technician, because there was only one on the neckline of the other three technicians.
The first goal is to add a dot to your neckline. Ertong thought excitedly. The deputy squad leader said even more: There is no way, the factory is too short of technicians. I don’t have to take it when you are too busy. I don’t want to take it all. I only see ten machines each of you. I’m relaxed. If you persist, I will hire another technician soon. I will arrange two smarter ones for you. As he said that, the deputy squad leader pointed at Ertong and another new worker: You, you two.
Lao Hu silently kept silent and turned on the power of the two machine tools with a dark face. After a complicated operation, the preheating and trial operation were completed. Then Lao Hu stood beside a machine tool and quickly demonstrated the operation process. Before he put down the pneumatic screwdriver, an employee shouted: Lao Hu! I need to wash this mold!
Here comes! As soon as you go to work, you have to wash the bitch raised by the evening shift. Lao Hu scolded like a moan, and asked Ertong and the others: Do you know how to do it? You can try it yourself first and I will teach you when I have time. After that, he turned around and ran to the worker who was stretching his head anxiously and waiting for him.
Ertong took a deep breath, recalled the process he had just seen, and grabbed the mold and operated it. As soon as he bought it, he found that this thing was much heavier than he imagined, it seemed that it was not much bigger than a brick, but it was at least four or five kilograms, which almost made him fall to the ground without grasping it.
He quickly put the mold carefully and grabbed the pneumatic screwdriver. However, he saw that there were six screw holes on the mold, but only two screws were prepared. He hesitated, but Lao Hu was squatting in front of a machine tool not far away. He was so busy that he had to look at the other workers. When he saw that everyone had only locked two screws.
Is this OK? Ertong opened the mold suspiciously, put the metal blank in the groove on the inside of the sub-mold, then embedded the sub-mold into the male mold and locked the two screws, took a deep breath, and opened the shield door of the machine tool.
Open the air valve and place the mold on the groove of the bottom table. Close the air valve and pull the shield door. After a series of actions, Ertong nervously pressed the green start running button on the front control panel of the machine tool. The gray machine tool immediately started to run with a buzzing sound.
It seemed that there was no problem Ertong watched the machine tool running nervously, feeling that time was passing particularly slowly, he quickly realized that this was not an illusion, because he saw the display screen, the data displayed on it was ten thousand revolutions per minute, and the complete procedure for processing the mold took three minutes and nine seconds.
The technician deliberately slowed down, but Ertong immediately discovered that this was far from enough, and he had just prepared the second set of molds, and the spindle had stopped running. He had no time to place the processed side keys on the tray.
The four metal blanks embedded in the sub-mold are now cut into twenty side keys, not much larger than rice grains. They are neatly placed in the size of fingernails on the plastic tray. It requires quick and accurate movements, not to mention that these particles have been polished now, and have been poured by cooling water mixed with anti-rust oil and lubricating oil. They all become slippery and fall from the fingers by accident.
Ertong finally finished the first mold in a dizzy head, and found that the machine tool had stopped running. He panickedly grabbed the prepared mold and suddenly heard the voice of the deputy squad leader: No hurry
The deputy squad leader was standing behind Ertong for some time, which scared him. The mold in his hand almost fell off. Although his face was dull, the deputy squad leader's eyes were satisfied. He picked up a few products made by Ertong and looked at them, and nodded slowly: These should be qualified and can be installed.
Ertong swallowed and felt relieved suddenly
The deputy squad leader continued slowly: Don't hurry, take it slowly, no one is that fast at the beginning, just follow the process, don't make mistakes in your busy schedule.
Thank you, Deputy Team Leader Ertong also realized that he didn't need to be so in a hurry to enter the factory, so he had to learn a while
Call me Brother Ming. The deputy squad leader turned around and walked towards another new employee's machine tool next door Ertong heard his voice: Your blank installation is reversed, don't you find that the sub-model is not installed well, and the screws are not locked tightly? Oh, the tool has been broken. Lao Hu
Old Hu jogged over and complained with a sad face: Save me, I'll get the knife early this morning, and I'll be killed by the skin manager.
The deputy squad leader always speaks so slowly, but it makes people feel calm: The new employee who entered the factory misoperated today, and the supervisor of the skin won't hold you in the hands of you, okay, okay, I'll take you to change it with a spare knife first
Old Hu breathed a sigh of relief: Please trouble you, Liangzai
The deputy squad leader nodded, then turned to the office at the end of the production line.
After Ertong watched his back disappear from the machine tool, he couldn't help but smile and took a deep breath. He began to operate the machine tool without distraction. The first day of the first day, he was always accompanied by freshness. It was noon.
Ertong put on the blue and gray work clothes he had just sent out, and was with four other workers who entered the factory yesterday. Listening to the motivated squad leader's lecture, he kept staring at the red edge on the collar of the squad leader's work clothes, hoping that there would be two or three collars on his future.
I have nothing to say, the rules are the same everywhere, you are not three-year-olds, you know what to do and what not to do. The class monitor really has very few words: Come with me
Ertong followed the queue and quietly looked back at the cement basketball court. Su Qin was standing alone in front of a female cadre. She listened to the lecture like Ertong. She now wears a wide blue and gray work clothes, covering up her beautiful figure. This is not a place to pursue beauty, so she won't have any complaints.
Because this factory is not only remote, but also a metal processing factory, there are very few female workers who are willing to come. There are very few young female workers who have studied high school like Piqin, so she was immediately assigned to the quality inspection department. The products made by Ertongs will be judged by Suqins to determine whether they are qualified.
The female cadre was very nagging. Suqin probably had to listen for a while. Ertong had to withdraw his gaze, follow the squad leader into the workshop, and go to the fourth floor to go through security check. After the squad leader took them to a row of machine tools and shouted: This is our 0636A-6 class, our 0636 team is now making side buttons for a mobile phone from LG. Our class is the last process that comes out of us, and will be installed directly on the mobile phone. After saying this, the squad leader raised his voice: I have no lazy people or waste here, I will do it well for me!
The squad leader didn't even have a mask. Dell Tong thought that he was wearing a mask honestly. After saying that, the squad leader turned around and shouted: Bright!
A tall and thin young man who was five or six years older than a Bill boy poked his head out of the two machine tools room, and then ran over to the squad leader to signal him to stand in front of the new workers: This is the deputy squad leader Mingliang, mainly he is here, you can follow his command, I applied to the skin supervisor yesterday to add five machines today, and I prepared the supporting molds and tools before I went to work. You can turn on the machine directly. I also have to go to Lao Wu, Class 5, to coordinate the order of sending the rough to the new ones. You can arrange it. After that, I stuffed the new employee's roster into the deputy squad leader who did not wear masks.
Old Wu owed us eight thousand roughs yesterday. The deputy squad leader quickly shouted: Brother Heng, you urge me
The squad leader waved his hand to show his understanding, and then walked away without looking back.
These two grassroots cadres gave Ertong full of confidence because they were not old. If they could become deputy squad leader and squad leader at their age, Ertong felt that his dream could be a reality.
The deputy squad leader took the roster and took Ertong and the others to the empty half-row machine tool, arranged one for each of them and called four technicians: Each of you is responsible for one Lao Hu, you bring two
The technician named Lao Hu was only in his early thirties, but he was hunched over and had a hunched back. He had severe dark circles on his waxy face. Hearing this arrangement, he immediately muttered dissatisfiedly: I've seen sixteen machines, plus two more, everyone is exhausted.
Ertong looked at the two yellow edges on his neckline. This yellow edge marked Lao Hu as a senior technician, because there was only one on the neckline of the other three technicians.
The first goal is to add a dot to your neckline. Ertong thought excitedly. The deputy squad leader said even more: There is no way, the factory is too short of technicians. I don’t have to take it when you are too busy. I don’t want to take it all. I only see ten machines each of you. I’m relaxed. If you persist, I will hire another technician soon. I will arrange two smarter ones for you. As he said that, the deputy squad leader pointed at Ertong and another new worker: You, you two.
Lao Hu silently kept silent and turned on the power of the two machine tools with a dark face. After a complicated operation, the preheating and trial operation were completed. Then Lao Hu stood beside a machine tool and quickly demonstrated the operation process. Before he put down the pneumatic screwdriver, an employee shouted: Lao Hu! I need to wash this mold!
Here comes! As soon as you go to work, you have to wash the bitch raised by the evening shift. Lao Hu scolded like a moan, and asked Ertong and the others: Do you know how to do it? You can try it yourself first and I will teach you when I have time. After that, he turned around and ran to the worker who was stretching his head anxiously and waiting for him.
Ertong took a deep breath, recalled the process he had just seen, and grabbed the mold and operated it. As soon as he bought it, he found that this thing was much heavier than he imagined, it seemed that it was not much bigger than a brick, but it was at least four or five kilograms, which almost made him fall to the ground without grasping it.
He quickly put the mold carefully and grabbed the pneumatic screwdriver. However, he saw that there were six screw holes on the mold, but only two screws were prepared. He hesitated, but Lao Hu was squatting in front of a machine tool not far away. He was so busy that he had to look at the other workers. When he saw that everyone had only locked two screws.
Is this OK? Ertong opened the mold suspiciously, put the metal blank in the groove on the inside of the sub-mold, then embedded the sub-mold into the male mold and locked the two screws, took a deep breath, and opened the shield door of the machine tool.
Open the air valve and place the mold on the groove of the bottom table. Close the air valve and pull the shield door. After a series of actions, Ertong nervously pressed the green start running button on the front control panel of the machine tool. The gray machine tool immediately started to run with a buzzing sound.
It seemed that there was no problem Ertong watched the machine tool running nervously, feeling that time was passing particularly slowly, he quickly realized that this was not an illusion, because he saw the display screen, the data displayed on it was ten thousand revolutions per minute, and the complete procedure for processing the mold took three minutes and nine seconds.
The technician deliberately slowed down, but Ertong immediately discovered that this was far from enough, and he had just prepared the second set of molds, and the spindle had stopped running. He had no time to place the processed side keys on the tray.
The four metal blanks embedded in the sub-mold are now cut into twenty side keys, not much larger than rice grains. They are neatly placed in the size of fingernails on the plastic tray. It requires quick and accurate movements, not to mention that these particles have been polished now, and have been poured by cooling water mixed with anti-rust oil and lubricating oil. They all become slippery and fall from the fingers by accident.
Ertong finally finished the first mold in a dizzy head, and found that the machine tool had stopped running. He panickedly grabbed the prepared mold and suddenly heard the voice of the deputy squad leader: No hurry
The deputy squad leader was standing behind Ertong for some time, which scared him. The mold in his hand almost fell off. Although his face was dull, the deputy squad leader's eyes were satisfied. He picked up a few products made by Ertong and looked at them, and nodded slowly: These should be qualified and can be installed.
Ertong swallowed and felt relieved suddenly
The deputy squad leader continued slowly: Don't hurry, take it slowly, no one is that fast at the beginning, just follow the process, don't make mistakes in your busy schedule.
Thank you, Deputy Team Leader Ertong also realized that he didn't need to be so in a hurry to enter the factory, so he had to learn a while
Call me Brother Ming. The deputy squad leader turned around and walked towards another new employee's machine tool next door Ertong heard his voice: Your blank installation is reversed, don't you find that the sub-model is not installed well, and the screws are not locked tightly? Oh, the tool has been broken. Lao Hu
Old Hu jogged over and complained with a sad face: Save me, I'll get the knife early this morning, and I'll be killed by the skin manager.
The deputy squad leader always speaks so slowly, but it makes people feel calm: The new employee who entered the factory misoperated today, and the supervisor of the skin won't hold you in the hands of you, okay, okay, I'll take you to change it with a spare knife first
Old Hu breathed a sigh of relief: Please trouble you, Liangzai
The deputy squad leader nodded, then turned to the office at the end of the production line.
After Ertong watched his back disappear from the machine tool, he couldn't help but smile and took a deep breath. He began to operate the machine tool without distraction. The first day of the first day, he was always accompanied by freshness. It was noon.
![[Urban Novels] circle - plot, wife, mature woman](/templates/nvshen/themes/img/thumb_1.png)